TIMERS |
With Battery Backup
Single Display
Dual Display
Without Battery BackupPush Button Type
Thumb Whell Type
SPECIFICATIONS | |||||
Model | TX2 | Dual Set point Timer | |||
Power | Working voltage | 220 VAC ± 15%. 50 / 60 Hz | |||
Consumption | Approx 1.5 VA | ||||
Display | 4 Digit Seven Segment RED LED Display Size: 0.56" (Model: TX2 964, TX2 724, TX 484) |
||||
3 Digit Seven Segment RED LED Display Size: 0.56" (Model: TX2 483) |
|||||
Inputs | START | EDGE Timing starts on application of "START" input. (Open to close) |
|||
LEVEL The start input can be closed permanently and the timer will always read it as present. |
|||||
GATE When "START" is open the relay state does not change but the time counting stops. On make of "START" contact, time counting resumes. |
|||||
RESET | Remote / Front | NORMAL To start a new cycle a RESET input has to be given. |
|||
AUTO A new cycle can be started without first giving a RESET input. |
|||||
Operating MODES | ON Delay | ||||
INTERVAL Delay | |||||
Cyclic ON First | |||||
Cyclic OFF First | |||||
Output2 modes | Follow Output1 | ||||
Inverse of Output1 | |||||
PULSE (750ms on "START" input) | |||||
Time Ranges | 3 Digit model | 4 Digit Model | |||
0 - 9.99 sec | 0 - 99.99 sec | ||||
0 - 99.9 sec | 0 - 999.9 sec | ||||
0 - 999 sec | 0 - 9999 sec | ||||
0 - 9:59 min:sec | 0 - 99:59 min:sec | ||||
0 - 99.9 min | 0 - 999.9 min | ||||
0 - 999 min | 0 - 9999 min | ||||
0 - 9:59 hr:min | 0 - 99:59 hr:min | ||||
0 - 99.9 hr | 0 - 999.9 hr | ||||
0 - 999 hr | 0 - 9999 hr | ||||
Counting Direction | UP / DOWN | ||||
Ambient Temperatu | 0°C - 45°C (non- freezing status) | ||||
Humidity | 35 - 85% RH. |
Model | No of Outputs | No of Displays | Size |
TX2 964 | 2 | 4 | RP-96x96 |
TX2 724 | RP-72x72 | ||
TX2 484 | 2 | 4 | RP-48x48 |
TX2 483 | 3 |